Monthly Archives: September 2014

MWN-NK50-G 2″ cold water meter available for Horizontal / Vertical installation

Horizontal or Vertical Mount Woltmann with removable insert. Dry dial with magnetic transmission, sealed mechanism with direct reading on numbered rolls. 360° adjustable ring. Used in industry and irrigation. Pre-equipped for impulse emitter device (applicable even after installation). First quality materials resistant to corrosion. Nominal flow rate – 15,0m3/h Screwed BSPM Working temperature – 50°C […]

Metering for all applications!

The company started life as Direct Metering Supplies Limited but decided to rename itself during 2004 recognising that nearly all our clients had adopted the abbreviation ‘DMS.’ Over 10 years DMS have established ourselves as a major supplier of Water Meters, Heat and Cooling Meters, Gas Meters, Electricity Meters and Oil Meters. We hold comprehensive […]

DMS Quiz – Try your knowledge out on our quick quiz!

  What sort of meter is a Sontex Meter? Gas Heat Water What sort of meter is an MWN? Gas Heat Water What sort of meter is a JSC? Gas Heat Water What sort of meter is a BK-G Gas Heat Water What temperature is the Sontex Superstatic 440 rated to? 110°c 120°c 130°c What […]

VZO 4 1/8″BSPF Oil Meter 0.5 – 50 l/hr

  DMS bring you the VZO 4 1/8″ Aqua Metro Oil Meter with cubic type with mechanical roller counter. Connections with internal thread located underneath. Reed pulser (Option). Display is in litres & wide measuring range with max. permissible error of ±1% of reading. Your benefits… Space saving installation without requirement of straight inlet and outlet […]

PoWogaz JSC 1.6 (R160) 1/2″ Cold Water Meter 50C

DMS Bring you the JSC 1.6 1/2″ PoWogaz Cold Water Meter with Smart C+ single-jet vane wheel, designed for precise measurement of delivered water. Thanks to the newest construction solutions the water meter is adapted for installing the radio module which enables the remote reading of indications. It is the best secured vane-wheel water meter, resistant […]

DMS Sontex Heat Meter Training Sessions

DMS hold Sontex Heat Meter training sessions that are free of charge The sessions are held at our offices in Nottingham, the sessions last for around 4 hours – with a maximum of 10 attendees the sessions have a good 1 to 1 feel allowing for plenty of questions. Our training sessions are taken by […]

Elster Gas Meters – QA Turbine Meters from DMS Ltd

    Elster-Instromet quantometers are highly reliable gas meters, which can be used throughout the entire field of flow metering and which fulfil all of the varying requirements of industrial metering. The QA and QA quantometers work on the principle of the rotating turbine wheel. The rotation of the turbine wheel is proportional to the volume of the flowing […]

Elster Gas Regulator – J125 series – 20mm to 100mm from DMS Ltd

The J125 series provides a full range of regulators for service applications where accurate pressure control is required. The units are ideal for industrial pressure reducing, metering stations and for district distribution. The regulators are designed to maintain high accuracy and efficiency over the inlet pressure range of 70mb – 8.6bar (1-125 PSIG). The ¾” and […]

DMS Exhibiting at Nextgen/EBEC 8th & 9th October 2014